Pool Frog Installation Tips

https://goo.gl/Ttcz48 Enter to see the secret clearance page at Newfrog.
Choosing the Pool Frog Mineral System is a great way to get clean and clear water in your swimming pool while cutting down on chlorine and money spent at the very same time. Here's another benefit -- the Pool Frog Mineral System is even easy to install in your new or existing pool! Here are some quick tips for making your Frog adoption even easier. -Always install the Pool Frog Cycler AFTER all other equipment on the return line to the pool -NEVER connect the Pool Frog Cycler to copper piping due to the inevitability of chlorine corrosion -Don't stress out about whether your swimming pool circulates water from left to right or right to left -- every Pool Frog Cycler allows flow in either direction! -For easy cap removal, allow at least 12-15 inches of overhead room above the Pool Frog Cycler -If you're putting the Pool Frog Mineral System on an existing pool, consider using an off-line system for ease of installation -If your pool has a heater as a part of its circulation system, install a check valve between heater and Pool Frog Cycler to prevent flow of chlorine into heater -Always follow the directions specific to your particular swimming pool Of course, setting up your Pool Frog Mineral System can be a nice DIY job if you're handy with tools. But if possible, we recommend hiring a pool builder or serviceperson to install your Pool Frog Mineral System. After all, they're the professionals!